※ Personal opportunity for pets training, and is used to prevent pets’ depressing behaviors.
※ No cables needed, just place it beside of the objects you want to keep away from pets.
※ 20-150 yard controlling range between transmitter and collar receiver.
※ You can adjust the signals cover ranges according to the size of the space freely by yourself.
※ The sensitivity and accuracy of a cover division range are controlled digitally.
※ Automatic alarm or alert system, when pets enter the forbidden area.
※ Suitable for 2~70kg dogs.
150 Yards Controlling Range Wireless Fence With Automatic Alarm System | JB-03
INDOOR DOG FENCING SYSTEM
The transmitter and the receiver are connected by radio frequency signals, normally the signals can cover 20-150 yard diameter areas, and they can adjust pets forbidden area sizes according to the signals.
By the unique radio receiving system, the digital invisible fence can alarm automatically, and the sound may change intermittently, with harmless electronic stimulation, to remind the pets to enter the forbidden area.
INDIVIDUAL PROGRAM SYSTEM
This dog radio fencing system supports individual programming when you need to control 2 dogs with different allowable ranges, you just need to set them into mode A and B separately, it makes the whole system much more useful.
HOW TO USE:
The transmitter and the receiver are connected by radio frequency signals, normally the signals can cover 20-150 yard diameter areas, and they can adjust pets forbidden area sizes according to the signals. By the unique radio receiving system, the digital invisible fence can alarm automatically, and the sound may change intermittently, with harmless electronic stimulation, to remind the pets to enter the forbidden area. Programming system, each digital invisible fence can work in two different modes, you can set it to let one pet enter an area, and forbid another one enter.
How do buttons work:
Sensitivity Adjustment Button-Adjust the mode button, you can adjust the two modes A and B, A mode can only be allowed to wear A receiver dog in a specific range. B mode can only be allowed to wear a B-receiver dog within a specific range. Choose a specific pattern according to the different dogs.
LCD mode display-Display the current device in the mode, you can control the two modes, showing different modes to control different dogs.
Contact stigma-Suggesting that the stigma, when the controller is in the A mode, wear A-mode dog if away from the control range, then the dog collar will make a corresponding correction to the dog until the dog returned to the safe area.
Battery Bay-The battery cover is also the receiver mode adjustment knob. Turn the battery cover counterclockwise, replace the battery, turn on the receiver clockwise, and close the receiver in the middle position.
To turn the Transmitter on
In the invisible fence transmitter, according to (+)(-) codes, install 3pcs AA alkali batteries. Invisible fence system mode range setting: confirm position and forbidden area size, push button A or B on transmitter LCD, then you can see 6 stages on LCD, for each stage, the invisible fence range diameter is about 50cm, you can set and adjust according to actual situations, when the range setting is finished, you can put the transmitter on the proper area.
To turn the Receiver Collar on
Put the receiver onto the dog’s neck and install, make a clearance between it and the neck up to the width of a finger, the installation is quite important, as if the receiver is loosened, it can not work well. When it is installed, you can turn on the receiver, before that, you shall move your dog to an area out of the digital invisible fence setting system mode range. Receiver ON/OFF: turn receiver ON, the receiver starts, turn it OFF, the receiver stops. (please turn OFF when it will not be used for a long time). When you will replace the battery, you shall turn off before that.
Connect transmitter and receiver:
1. Turn receiver ON, then move it near to the transmitter ( within 25cm ).
2. Install 3 batteries into the transmitter, then the LCD display turns on, and push A and B at the same time, the display switch into JB-03 Dog Fence System
3. If you push B directly and display changes into Multi-Dog Fencing System JB-03, and you will hear a beep sound from the receiver, now it’s locked into mode A
4. If you press A once within 15 seconds after step 2, the display turns into Dog Radio Fence System, and press B to set the collar into mode B
5. If you press A twice within 15 seconds after step 2, the display turns into Multiple Dog Radio Fencing Collar with a flashing line, and press B, you set the collar into A & B mode, that means the two collars are under the same training program.
6. Press and A and B at the same time, and return to the controlling mode, and pree A and B to adjust the allowable distance between transmitter and receiver.