※ Multi-Dogs Training With 300-yard range.
※ 100 levels of vibration & static shock (optional).
※ Rechargeable remote transmitter and receiver collar.
※ Waterproof receiver collar and your pet can swim with the collar.
※ In the LED light mode it activates a flashing green LED light per second.
※ In the beep mode, it activates a tone on the receiver.
330 Yards Remote Range Rechargeable Golden Retriever Training Collar | WT738N
CENTRALIZED CONTROL SYSTEM, FIX EVERYTHING WITH ONE “MOED”
Golden Retriever Training Collar | WT738N is designed with basic pet dog training functions: beep, vibration, static shock. What makes it different is its One-Stop training system. You don’t need to remember the buttons with their different functions, you may press ” the other buttons ” by mistake.
HUMANIZED DESIGN MAKES IT MORE COMFORTABLE TO USE
Buttons for beep, vibration and shock correction are designed separately with different colors, it’s much easier for you to make effective control of your dog. Besides, The Big LED Display with Blue Backlight makes it possible to use even in the night.
100 INTENSITY TRAINING LEVELS WITH NO JUMP SAFE FOR DOG TRAINING
Golden Retriever Training Collar | WT738N has 100 intensity levels for shock & vibration, you can choose the proper levels depending on how your dog reacts while training, it goes well with a large range of dogs of different sizes. The No Jump design can protect the dog from a sudden increase in intensity.
HOW TO USE
Charge the remote transmitter:
1) Connect the charger connector to the charging jack
2) Plug the charger into a standard outlet.
3) The red light on the transmitter will light up.
4) Charge the transmitter for at least 4 hours for the first use.
5) After charging is complete, the red light will flash.
Charge the collar receiver:
1) Connect the charger connector to the DV-5V hole.
2) Plug the charger into a standard outlet.
3) The red light will appear on the receiver.
4) Charge the receiver for at least 6 hours for the first use.
5) After charging is complete, the green light will turn on automatically.
How Do Buttons Work
LED Indicator-this light will flash when transmitter works, or when charging, this light will be on.
LCD Screen-Static mode: Under this mode, press Y button, the Receiver will shock; Up/down button, can adjust Static level from 0 to 100
Vibration mode: Under this mode, press Y button, the Receiver will shock; Up/down button, can adjust Vibration level from 0 to 100
Beep mode: Under this mode, press the Y button, the Receiver can get a “beep” sound
Light mode: Under this mode, press Y button, the green LED light in the receiver will flash every one second, it is convenient to let you know where your pet is.
Channel 1: select to encode between the transmitter and one of receiver collar
Channel 2: select to encode between transmitter 2nd one of receiver collar
select to encode between the transmitter and one of receiver collar
LED light button-When pressing the LED light button, the LED light on the
transmitter will be on.
Channel button 1-100 level-Pressing this button will swap between the first and second
Up/Down button-Intensity level button for vibration and static shock.
Launch button-Sends the signal from the transmitter to receiver, resulting in
stimulation, beep or light, depending on your mode selection
Mode button-Press this button to switch between modes. There are 4 modes: Static, Vibration, Beep, and light mode
To turn the Transmitter on
To turn on/off the Transmitter, Press the mode button on the Transmitter for 5 seconds. By pressing the Mode button to change to different modes —-the LCD images will change. Press the up and down buttons on the right-hand side to set level. Choose the different channels for different receivers. The Transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.1n STANDBY MODE, press any button (except LED light button) to wake it up.
To turn the Receiver Collar on
Connect the charger connector to the charging jack. Plug the charger into a standard outlet. The red LED light inside the Collar Receiver will turn onCharge the Collar Receiver at least 6 hours for the first charge. After fully charged, the red LED light will be turned off automatically. When charging is completed, put the rubber cover in the right position to keep the internal unit from dust and water. Low battery Indicator: the Collar Receiver will keep beeping for 2 minutes unless it gets charged.
Connect transmitter and receiver:
If your Receiver Collar does not beep when the TONE Button of the Remote Transmitter is pushed, or if you feel the Receiver Collar is not responding to the Remote Transmitter, follow these steps:
1. With the Receiver Collar off your pet, turn the Receiver Collar off. Restart, press and hold the On/Off Button until the Green LED flashes every second on the Receiver Collar. This continues for 16 seconds, within which pairing should be completed.
2. Press and hold the TONE and VIBRA Button of the Remote Transmitter at the same time until the Green LED Light on the Receiver Collar flashes rapidly for 5 times, indicating pairing is completed.